點擊圖片查看大圖
CCG鎧裝防爆格蘭（CCG 0571-E1EX-U Captive Component Cable Gland）
CCG防爆格蘭代理商：上海頤品自動化科技有限公司
關鍵詞：CCG非鎧防爆格蘭，CCG防爆密封接頭，CCG鎧裝防爆格蘭，CCG防爆填料函
CCG接管型防爆格蘭，CCG單密封防爆格蘭，CCG雙密封防爆格蘭， CCG帶填料膠水防爆格蘭
CCG防爆變徑接頭，CCG防爆堵頭，CCG防爆呼吸閥，CCG防爆轉接頭，CCG防爆接線盒等
CCG防爆格蘭代理商：上海頤品自動化科技有限公司
CCG E1EX-U Captive Component Cable Gland (0571)
CCG - Captive Cone Glands
Hazardous Cable Glands & Kits
Product overview
CCG E1EX-U Captive Component Cable Gland (0571)
CCG E1EX-U Captive Component Cable Gland (0571) is a Hazardous Area Glanding Device for Multi Armoured Cable. Suitable for indoor, outdoors, Group I, II, III, Zone 1, 2, 21 and 22 hazardous areas.
CCG Part Numbers: 057100-16, 057100S, 057100, 0571-0S, 0571-0, 057101, 057122, 057102, 057133, 057103, 057144, 057104, 057155, 057105, 057166, 057106, 057177, 057107, 057108, 057199, 057109, 057110
Features & Benefits
- For indoor, outdoors, Group I, II, III, Zone 1, 2, 21 and 22 hazardous areas.
- Freely rotating captive cone and inspectable cone ring provides an armour clamp and earth bond for steel wire, aluminium, braid and tape armour.
- Patented disconnect system that allows inspection of armour clamp and inner seal after assembly.
- Factory fitted captive elastomeric seals for Built-in SafetyTM. Seals on both inner and outer sheaths to IP66/68.
- Precision manufactured from high-quality brass (Marine Grade Electroless Nickel PlatedTM) available in stainless steel 316/316L on request. Supplied with a thread sealing gasket (parallel threads only).
CCG E1EX-U Technical Data
Type: E1EX-U (Universal)
Equipment Protection Levels: Ex db I/ IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire, Aluminium, Braided and Tape Armour
Armour Clamping: Rotating Captive Cone and Inspectable Cone Ring
Sealing Area: Inner Sheath and Outer Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud
Note: The installer should ensure that the materials are suitable for the installation environment.
Installation Standards
- IEC/BS EN
- IECEx
- ATEX
- UKEX
- INMETRO (Brazil)
- TR CU (Russia)
- CCC/CNEx (China)
- KCs (Korea)
- SANS/IEC
- Ingress Protection
- Deluge Protection
- Corrosion Protection
- Marine ABS
- DNV-GL
- ClassNK
- EMC Compatible
Hazardous Areas
A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such bs are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.
Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.
Additional Technical Data on CCG E1EX-U Captive Component Cable Gland (0571) Part Numbers can be found on the table below. For Conbing Standards & Certificates as well as Fitting Instructions, please advise PDF File.
Technical Data：
|
上海頤品 Product Code |
Gland Size Ref. | Metric Entry Thread (C) | Metric Entry Thread (Min D) | NPT Entry Thread (C) | NPT Entry Thread (Min D) | Cable Detail (Min A) | Cable Detail (Max A) | Cable Detail (Min B) |
Cable Detail (Max B) |
Max Length (E) |
Armour Dia (Min F) |
Armour Dia (Max F) | Hexagonal Detail (Max Flats) | Hexagonal Detail (Max Crns) | Installation Torque Value (Nm) |
| 057100-16 | 00-16ss | M16x1.5 | 15 | - | - | 3 | 8.5 | 5 | 10.5 | 60 | 0.2 | 0.9 | 25/27 | 28/30 | 21 |
| 057100S | 00s-20ss | M20x1.5 | 15 | ½/¾ | 15 | 3 | 8.5 | 5 | 10.5 | 60 | 0.2 | 0.9 | 25/27 | 28/30 | 21 |
| 057100 | 00-20s | M20x1.5 | 15 | ½/¾ | 15 | 3 | 8.5 | 8 | 13.5 | 60 | 0.2 | 0.9 | 25/27 | 28/30 | 21 |
| 0571-0S | 0s-20s | M20x1.5 | 15 | ½/¾ | 15 | 7 | 12 | 8 | 13.5 | 60 | 0.2 | 1.25 | 25/27 | 28/30 | 21 |
| 0571-0 | 0-20s | M20x1.5 | 15 | ½/¾ | 15 | 7 | 12 | 11.5 | 16 | 60 | 0.2 | 1.25 | 25/27 | 28/30 | 21 |
| 057101 | 1~20 | M20x1.5 | 15 | ½/¾ | 15 | 9 | 15 | 12.5 | 20.5 | 73 | 0.2 | 1.25 | 30 | 34 | 21 |
| 057122 | 2s-25s | M25x1.5 | 15 | ¾/1 | 15/19 | 11 | 17.5 | 16 | 24.5 | 82.4 | 0.2 | 1.6 | 38 | 43 | 30 |
| 057102 | 2~25 | M25x1.5 | 15 | ¾/1 | 15/19 | 14 | 20 | 18 | 27 | 82 | 0.2 | 1.6 | 38 | 43 | 30 |
| 057133 | 3s-32s | M32x1.5 | 15 | 1/1¼ | 19 | 15 | 22 | 20 | 30.5 | 91 | 0.2 | 2 | 45 | 51 | 42 |
| 057103 | 3-32 | M32x1.5 | 15 | 1/1¼ | 19 | 19 | 26.5 | 23 | 33.5 | 91 | 0.2 | 2 | 45 | 51 | 42 |
| 057144 | 4s-40s | M40x1.5 | 15 | 1¼/1½ | 19/21 | 22 | 31.5 | 26.5 | 39.5 | 105 | 0.3 | 2 | 55 | 62 | 52 |
| 057104 | 4-40 | M40x1.5 | 15 | 1¼/1½ | 19/21 | 26 | 34 | 28 | 40 | 105 | 0.3 | 2 | 55 | 62 | 52 |
| 057155 | 5s-50s | M50x1.5 | 15 | 1½/2 | 21 | 29 | 38 | 35.2 | 46.7 | 123 | 0.4 | 2.5 | 65 | 73 | 57 |
| 057105 | 5-50 | M50x1.5 | 15 | 1½/2 | 21 | 34 | 44.5 | 44.4 | 53 | 123 | 0.4 | 2.5 | 65 | 73 | 57 |
| 057166 | 6s-63s | M63x1.5 | 15 | 2/2½ | 21/30 | 38 | 50 | 45.5 | 59.4 | 147 | 0.4 | 2.5 | 85 | 96 | 66 |
| 057106 | 6-63 | M63x1.5 | 15 | 2/2½ | 21/30 | 44 | 56.5 | 54.6 | 65.9 | 147 | 0.4 | 2.5 | 85 | 96 | 66 |
| 057177 | 7s-75s | M75x1.5 | 15 | 2½/3 | 30/32 | 50 | 62 | 59 | 72.5 | 149 | 0.4 | 3.15 | 96 | 108 | 72 |
| 057107 | 7-75 | M75x1.5 | 15 | 2½/3 | 30/32 | 56 | 67.5 | 65 | 78 | 149 | 0.4 | 3.15 | 96 | 108 | 72 |
| 057108 | 8-80 | M80x2.0 | 20 | 3 | 32 | 59 | 69 | 65 | 77.5 | 195 | 0.4 | 3.15 | 96 | 108 | 80 |
| 057199 | 9s-90s | M90x2.0 | 20 | 3/3½ | 32/33 | 66 | 75 | 73 | 86.5 | 204 | 0.4 | 3.5 | 111 | 125 | 89 |
| 057109 | 9-90 | M90x2.0 | 20 | 3/3½ | 32/33 | 74 | 81.5 | 82 | 91 | 204 | 0.4 | 3.5 | 111 | 125 | 89 |
| 057110 | 10-100 | M100x2.0 | 20 | 3½/4 | 33/34 | 81 | 91 | 90 | 100 | 209 | 0.4 | 3.5 | 125 | 141 | 98 |
All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.